Swimming pools are a necessity during summer. Whether you like diving into the cold water or prefer to lounge on the deck, they’re perfect for people of all ages. However, there’s a lot of responsibility that comes with owning one. From cleaning it to neutralizing the water, swimming pools require plenty of maintenance.
So, how exactly can you counteract all these tiny problems? Why, through pool resurfacing, of course! — But what does it mean to resurface a pool, and how long does it take?
If you’re asking yourself the same questions, don’t worry. This blog will cover all the essential points about swimming pools and the resurfacing process.
What is Pool Resurfacing?
If you’ve come across cracks or broken-off chunks in your pool, it’s time to resurface your pool. As complicated as it sounds, pool resurfacing is a pretty simple concept. It involves removing the top layer of your swimming pool and then replacing it with a new coating. This helps to smooth out any fissures in the pool’s surface and prevents water from leaking out.
Pool resurfacing is usually sealed off with a polished finish made of glass, glass beads, pebbles, quartz, or plaster. In any case, the new flooring of your pool will gleam, enhancing the overall appearance and feel of your beloved water oasis.
How Long Does It Take to Resurface a Pool?
Since every swimming pool is unique and made of different materials while being of an alternating shape or size, it’s only given that the time it takes to resurface them varies. For instance, most pool floors are curated from concrete, plaster, vinyl, and even fiberglass. In most cases, though, it only takes 2 to 5 days to resurface a pool.
Although there are times when the weather may play a part in delaying the process or if an underground leak is spotted. Nonetheless, the process is well taken care of and dusted within a week.
How Often Does a Pool Need to Be Resurfaced?
As cumbersome as it is, the answer is a basic ‘it depends.’ But this is mainly due to whether your swimming pool is commercial or residential. In either case, most pool owners don’t resurface their pool, stretching out the timeline until the flooring cracks and starts to dissipate.
Although if you have a pool in your backyard, that is, a residential pool, you don’t have to worry about resurfacing it as much. In contrast, if you own a commercial swimming pool, you might want to take a look at its condition and when it was last remodeled.
Of course, the material of the flooring also matters. However, on average, you should consider resurfacing your pool anywhere from 10 to 20 years, depending on the surface type.
How Does Pool Resurfacing Work?
A lot of planning and careful consideration goes into building and resurfacing a pool. Turning it brand new in only a couple of days requires plenty of steps. Nevertheless, here’s a basic rundown of what the procedure looks like:
- Drain the pool of all water.
- Prepare the area by peeling off the old layer.
- Install new base and masonry.
- Seal off the base layer to prevent leakage.
- Finish off the installation process by laying out the selected pool finish.
- Clean away any remaining dirt or debris.
- Refill the pool with water.
- Neutralize and treat the new water to maintain a healthy pH balance.
- Carefully monitor the pool to ensure the new flooring is stable.
Once everything is set in place, you can dive right into your private lagoon and enjoy a refreshing swim.
Long Story Short
To summarize, pool resurfacing is an intensive procedure that replaces your pool’s flooring to enhance its appearance and functionality. Essentially, it takes 2 to 5 days to resurface a pool altogether. So, if you, too, have a swimming pool and want to upgrade it, why not contact Advance Construction Roofing to get all your renovations in order? Reach out at (936) 521-2446 for more information. You can even visit our outlet in Conroe at 1135 Grand Central Parkway, TX 7730. It’s only a two-minute walk away from Marcel Boulevard.